Table of Contents
Advertisement
air from the unit (1-8 minute, depending on shelter size). After fully
deflate, push and turn the center valve core to pop up, and cover with
the valve cap.
Folding:
1. After fully deflate, put the shelter along the length direction
(perpendicular to the front and rear doors), then fold it inwardly for
two or three times according to the size of the shelter.
→
When folding the shelter, be sure below items:
1. Ensure all air has been evacuated from frame. Otherwise could not put
back into the carrying bag.
2. Allow your air shelter to dry thoroughly in the shade before storing,
never in bright sunlight. Store your air shelter in a cool, flat and dry place
with some air in the air chambers if possible.
3. It is important to dry off the unit completely before final packing into
the carrying bag. This may not be feasible immediately after use, and
might be better done back at base. Please note that storing wet shelters
with either water and/or detergent residue on the canopies may result in
the growth of surface mold and an accompanying mold odor on the
surface of the canopies. The canopies themselves will not rot or mildew,
but the growth of surface mildew/mold in/on the residue may occur.
4、You may fold your shelter 3-4 times, depending on actual demands.
→
2. Roll from end.
3. Put it in carrying bag and fasten it.
↑
14
Advertisement
Table of Contents
