Audio Setup - Philips HTS7540/12 User Manual

[HDMI Video]
Selects the HDMI video output resolution
that is compatible with your TV display
capability.
• [Auto] - Detects and selects the best
supported video resolution automatically.
• [Native] - Sets to original video
resolution.
• [480i/576i] , [480p/576p] , [720p] , [1080i] ,
[1080p] , [1080p/24Hz] - Selects a video
resolution setting that is best supported
by the TV. See the TV manual for details.
Note
•
If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for
auto recover or press HDMI repeatedly until
the picture appears.
[HDMI Deep Colour]
This feature is available only when the display
device is connected by a HDMI cable, and
when it supports the deep colour feature.
• [Auto] - Switches on automatically if the
connected display device supports HDMI
deep colour.
• [On] - Enjoys vivid images in over a billion
colours on Deep Colour enabled TV.
Outputs 12 bit colour that reduces the
posterisation effect.
• [Off] - Outputs standard 8 bit colour.
[Component Video]
Selects the Component video output
resolution that is compatible with the TV
display capability.
• [480i/576i] , [480p/576p] , [720p] , [1080i]
- Selects a video resolution setting that
is best supported by the TV. See the TV
manual for details.
Note
• If the setting is not compatible with the TV, a
blank screen appears. Wait for 15 seconds for
auto recovery.
34 EN
[Picture Settings]
Selects a predeÀ ned set of picture colour
settings.
• [Standard] – Original colour setting.
• [Vivid] – Vibrant colour setting.
• [Cool] - Soft colour setting.
• [Action] – Sharp colour setting. It
enhances the details in the dark areas.
Ideal for action movies.
• [Animation] – Contrast colour setting.
Ideal for animated pictures.
[Black Level]
Improves black colour contrast.
• [Normal] - Standard black level.
• [Enhanced] - Enhances black level.

Audio Setup

1
Press .
2
Select [Settings] , then press OK .
3
Select [Audio Setup] , then press .
Video Setup Night Mode
Audio Setup HDMI Audio
Speaker Setup
Preference Setup
EasyLink Setup
Advanced Setup
4
Select an option, then press OK .
5
Select a setting, then press OK .
• To return to the previous menu,
press BACK .
• To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
Off
Auto
.