Listen To Radio - Philips HTS7540/12 User Manual

First time tuning
When you access radio mode for the À rst
time, follow the instruction to install the radio
stations.
1
Press RADIO .
»
'AUTO INSTALL ... PRESS PLAY' is
displayed.
2
Press ( Play ).
»
All detected radio stations are stored.
»
Once complete, it tunes to the À rst
preset radio station.
• To stop auto tuning, press
Note
• This Home Theatre System can store up to a
maximum of 40 radio stations.
•
If auto installation is not activated or less
than 5 radio stations are stored, you will be
prompted to install the radio stations again.

Listen to radio

1
Press RADIO .
2
Use the remote control to control the
radio.
Button Action
/ Selects a preset radio station.
/ Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
• The preset number for
other radio stations remain
unchanged.
Note
•
If the FM radio station transmits RDS (Radio
Data System) data, the name of the radio
station is displayed.
Reinstall all the radio stations
1
2
•
Check the radio antenna connection if no
stereo signal is detected or less than 5 stations
are detected during radio installation.
.
Search and store radio stations
individually
1
2
3
4
5
6
Press RADIO .
Press and hold PROGRAM for more than
5 seconds.
»
All previously stored radio stations are
replaced.
Note
Press RADIO .
Press / .
»
It starts searching until a radio station
is detected.
Repeat step 2 until you tune to the radio
station you wish to store.
• To À ne tune the radio frequency,
press / .
Press PROGRAM .
»
The preset station number blinks.
»
If no action is carried out within 20
seconds after the above step, it exits
the preset mode.
Press / (or the Numeric buttons ) to
select a preset number to store.
Press PROGRAM to conÀ rm.
EN 31