Samsung LB15VS Service Manual page 12

3 Disassembly and Reassembly
3-2 Reassembly
Reassembly procedures are in the reverse order of disassembly procedures.
3-4
3. Disconnect 3 ground from the shield video and
carefully remove the silicon glue on the CDT
socket with a razor.
Caution : CDT socket may be easily
!
damaged. Please use caution when remoning the
silicon glue.
4. High voltage may be present.
Caution : Remove the high voltage cap from
!
the CDT.
5. Disconnect DY cable, D-COIL cable from the
CDT socket. Using the jig, release the snaps
connecting the front cover and the PCB. Lift up
the bottom to separate the two shields.
6. Disconnect function wire connecter from the
MAIN board. Remove 4 screws from the front
cover.
7. Remove CDT from the front cover.
LB15VS/LB17LS/LB17KS/
LB17LT/LB17KT