Samsung LB15VS Service Manual page 11

3-1-3 LB17LS/LB17LT
LB15VS/LB17LS/LB17KS/
LB17LT/LB17KT
3 Disassembly and Reassembly
5. High voltage may be present.
Caution : Remove the high voltage cap from
!
the CDT.
6. Disconnect DY cable, D-COIL cable from the
CDT socket. Using the jig, release the snaps
connecting the front cover and the PCB. Lift up the
bottom to separate the two shields.
7. Disconnect function wire connecter from the
MAIN board. Remove 4 screws from the front
cover.
8. Remove CDT from the front cover.
1. Release the snaps on the rear stand and pull the
stand backwards from the monitor and remove 2
screws from the rear top shield.
2. Insert the opining jig into the grooves at each side
and press until it cilcks and lift up the rear cover.
3-3