Samsung LB15VS Service Manual page 10

3 Disassembly and Reassembly
3-1-2 LB17KS/LB17KT
3-2
6. Disconnect function wire connecter from the
MAIN board. Remove 4 screws from the front
cover.
7. Remove CDT from the front cover.
1. Release the snaps on the rear stand and pull the
stand backwards from the monitor and remove 2
screws from the rear top shield.
2. Insert the opining jig into the grooves at each side
and press until it cilcks and lift up the rear cover.
3. Remove 2 screws from the shield and lift up the
shield.
4. Disconnect 3 ground from the shield video and
carefully remove the silicon glue on the CDT
socket with a razor.
Caution : CDT socket may be easily
!
damaged. Please use caution when remoning the
silicon glue.
LB15VS/LB17LS/LB17KS/
LB17LT/LB17KT