Display Settings; Energy Saving Settings; Speaker Settings; Restore Default Settings - Philips HTS3541/12 Quick Start Manual

3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Change Password] : Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000 .
•
[Parental Control] : Restrict access to
discs that are recorded with age ratings.
To play all discs, irrespective of the ratings,
select 8 or [Off] .

Display settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Auto Subtitle Shift] : Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
•
[Display Panel] : Set the brightness of the
home theatre front panel display.
•
[VCD PBC] : Enable or disable the content
menu navigation of VCD and SVCD discs
with Play Back Control feature.

Energy saving settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Preference] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Screen Saver] : Switch the home theatre
to screen saver mode after 10 minutes
of inactivity.
•
[Auto Standby] : Switch the home theatre
to standby after 30 minutes of inactivity.
This timer only works when a disc or
USB play is paused or stopped.
•
[Sleep Timer] : Set the duration of the sleep
timer so that the home theatre is switched
to standby after the specifi ed period.
18

Speaker settings

1
( Home ).
Press
2
Select [Setup] , and then press OK .
3
Select [Advanced] , and then press OK .
4
Press the Navigation buttons and OK to
select and change:
•
[Enhanced Audio] : Select [On] to enable
audio post processing on the speaker and
enable karaoke settings (if your product
supports Karaoke). To play the original
audio of the disc, select [Off] .
Tip
•
Enable audio post processing before you select a
predefi ned sound mode (see 'Sound mode' on page
15 ) .

Restore default settings

1
Press ( Home ).
2
Select [Setup] , and then press OK .
3
Select [Advanced] > [Restore Default
Settings] , and then press OK .
4
Select [OK] , and then press OK to confi rm.
» Your home theatre is reset to its default
settings except for some settings, such
as parental control and DivX VOD
registration code.
EN