Bestway 65311E Owner's Manual

Warning

IMPORTANT SAFETY INSTRUCTIONS

Read the manual and follow the instructions relating to safety tips, correct
and complete product assembly, setting into service, use and maintenance.
For your own safety, always heed the advice and warnings in these
instructions. Non-compliance with these operating instructions may expose
you to serious danger or death. Only use the product in the places and
conditions for which it is intended.
User should realize and understand these risks. The use of this product
implies the respect of the safety instructions described in the manual.
Do not use this product if you are under the influence of alcohol, drugs or medications.
Life saving devices such as life jackets and buoys should be pre-inspected and used at all times.
Use the product near the shore and beware of natural factors such as wind, tidewaters and tidal waves. BE
AWARE OF OFFSHORE WINDS AND CURRENTS.
NO DIVING.
Before every use, carefully inspect the product for signs of wear or leakage to ensure everything is in good
condition.
Beware of potential harmful effects of liquids such as battery acid, oil and petrol. These liquids may damage
the product.
Stay balanced. Uneven distribution of loads on the board may cause the board to overturn which could lead to
drowning.
SAVE THESE INSTRUCTIONS

Technical Specifications

Item
65311E/65314E
#65311E/65314E
001
005

Installation

1. Spread out the platform on level ground.
2. Use your platform at first time or after long period storage, check the air valve and tighten the valve with the provided wrench
first. (Fig. 1).
Attention: Don't adjust the air valve when the platform is in use.
Warning: Don't rotate the wrench counterclockwise when inspect the inflation, or it will be danger.
3. Inflate the platform by unscrewing the cap of the air valve (Fig.2 Pos.1). Ensure that the inner spring valve is not depressed. If
it is depressed(Fig.2 Pos. 2), press the spring valve and turn counter clockwise so the inner spring valve is in the correct
position (Fig.2 Pos. 3). Inflate the platform to 0.69bar (10psi). After inflation, screw the cap of air valve (Fig.2 Pos. 4)
NOTE: If over-inflation occurs, press the spring valve to release air to an acceptable level and securely fasten the air valve.
NOTE: If the platform is not in use and exposed under the sun, it may cause overexpansion and damage the platform. Check
the pressure and deflate slightly until the correct pressure is obtained.
303021193334_14x21cm_#65311E; #65314E
Owner's manual
Inflated Size
15ft. x 5ft. x 6in. / 4.57m x 1.52m x 15cm
002 003
006
Recommended
Working pressure
0.69 bar (10 PSI)
Part No. Description
001 Platform
002 Wrench
003 Polyester 3-ply patch
004
004 Bag
005 Air Valve
006 Repair Kit
007
007 Anchor Bags
1
TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
www.bestwaycorp.com/support
Maximum Load Capacity
475 kg (1047 lb)
SPARE PART NO.
QTY
(#65311E/65314E)
1
P00102
1
F6H189
1
/
1
F3269
1
P6H971
1
P5660/P5661
2 P00106
303021193334