Philips HTS6120/12 User Manual page 22

Map the devices to the audio inputs
Note
•
Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theatre System.
EasyLink Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
Low Power Standby
DivX(R) VOD Code
1
Press DISC.
2
Press SETUP.
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup], then press
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On],
then press OK to start scanning devices.
»
Once complete, the audio input
mapping menu is displayed.
SCART Input
Aux1 Input
Aux2 Input
Aux3 Input
Coaxial Input
Optical Input
22 EN
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
[TV]
[DVD 3400]
other(non-HDMI)
6
Select the audio input of this Home
Theatre System that is used to connect to
other HDMI device, then press .
• For example, if the TV audio is
connected to the AUX1 jack on the
Home Theatre System, select [Aux1
Input] and map with the TV (brand
name) at the right panel.
7
Select the correct connected device, then
press OK.
»
Repeat steps 5–7 to map other
connected devices.
8
Press SETUP to exit the menu.