Connect Power Cord; Mount The Product - Philips HTS6120/12 User Manual

Connect iPod docking station
1
Connect the iPod docking station
(optional accessory - not supplied) to
FOR iPod DOCK jack on the Home
Theatre System.
2
To view videos/photos from an iPod,
connect a composite video cable from
the docking station to the TV and switch
the TV to the correct viewing channel.
Note
•
To listen to the audio output from this
connection, press iPod DOCK.
16 EN

Connect power cord

Warning
•
Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the product.
1
Connect the power cord to the socket
when all the required connections are
made.
»
This product is ready to be set up for
use.

Mount the product

Caution
•
Risk of personal injury and damage to the
product. Allow only qualifi ed persons to
mount the product.
1
Ensure all the required cables are
connected to the Home Theatre System
and close the rear cover.
2
Attach the supplied knobs to the rear of
the Home Theatre System.