Advertisement
Start the application
„Firmware Updater Expert D Version X.X.exe"
If the equipment is correctly attached, the adjacent opinion appears.
Click on the button „Install". The program unpacks the required files
into the temporary register „C:\TEMP\Expert D Firmware Updater
Version X.X" and starts automatically.
October 2017
If the unit is not connected to the
computer or is not in the programming
mode, you receive the left shown
window.
If that is the case, please attach
equipment
now
and
programming
mode,
above.
activate
the
as
described
Page 2 of 3
Advertisement
