Cleaning The Water Flosser; Cleaning The Water Tank, Water Hose, And Water Filter - ETEKCITY EWF-32 User Manual

Note:
• Do not use the water flosser
while it is charging.
• To maximise battery life,
recharge the battery
whenever
• indicates the water
flosser has a full battery,
indicates the battery
is at half power, and
indicates the water flosser
must be recharged.
• The water flosser includes a
lithium battery that cannot
be replaced. Towards the
end of the battery life,
please recycle at your local
recycling centre.
Cleaning the
Water Flosser
1. Turn the water flosser off.
2. Fill the water tank with
clean water and allow it to
run until the water tank is
empty.
3. If necessary, rinse the water
flosser under clean running
water.
4. Dry with a soft cloth.
Figure 3.1
Cleaning the
Water Tank, Water Hose,
and Water Filter
1.
turns red.
2.
3.
4.
5.
Turn the water flosser off
and turn the water tank to
the position
[Figure 3.1].
Gently pull off the water
hose and filter from the
water flosser [Figure
Rinse under clean water or
clean with a toothbrush or
soft cloth.
Optionally, you can remove
the water filter by gently
pulling it off with a fingernail
or the flat end of a toothpick
[Figure 3.3]. Clean the filter
with a toothbrush or soft
cloth and rinse.
Dry all parts with a clean
cloth.
Figure 3.2
Figure 3.3
EN
3.2].
11