Maintenance; Charging The Battery - ETEKCITY EWF-32 User Manual

EN
Using Your Water Flosser
(Cont.)
6. Repeat along the inside of
your gums, until all teeth are
fully cleaned
7. Press
flosser off.
Note:
• The jet tip can be rotated
360° to adjust the direction
of the water flow.
• You can switch between the
3 water pressure modes at
any time.
• The water flosser will
automatically shut off after
2 minutes.
• The water flosser will
remember your last used
water pressure.
• Water may sometimes leak
from the sides of the water
tank. This is normal.
Figure 1.3
10
[Figure 1.3].
to turn the water

Maintenance

Charging the Battery

The water flosser comes with
a rechargeable Li-ion battery
inside. Use the included charging
cable to charge the water flosser.
will turn red when it's time
to recharge the battery.
1. Insert the USB charging
cable into the charging port
on the water flosser
[Figure 2.1].
Figure 2.1
2. Plug the USB charging cable
into a DC 5V adapter and
plug into an outlet. You can
also plug the cable into a
powered USB outlet.
3. Charging may take up to 4
hours. The water flosser is
fully charged when
turns green.