Advertisement
5. TROUBLE SHOOTING
FAUlT DESCRIPTIon
HEATER DoES noT oPERATE
OTHERS
6. MAINTENANCE
ELECTRICAL TEST, MAINTENANCE & STORAGE WARNING: THIS IS A CLASS 1 TESTED APPLIANCE
When earth bond testing, the readings should be 0.10Ω and below.
Disconnect from the mains and allow to cool before moving or attempting any cleaning or maintenance.
Clean the heater with a moist cloth and some mild detergent.
Use a vacuum cleaner outside grille to clean dust from internal parts.
When not in use, store the heater carefully in a safe, dry, childproof location.
To replace any of the elements, contact your authorised Sealey dealer.
DO NOT perform a flash test, as this will reduce the life of the elements.
DO NOT use abrasive cleaners or polishes on casing or grille.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a
recycle centre and disposed of in a manner which is compatible
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey limited 2013
SUGGESTED SolUTIon
Check power supply/fuse, if it trips or fuses (13amp) again go to oTHERS.
Check for damage if accidently knocked or dropped, cracked casing or snagged wiring go to oTHERS.
Check for tilt safety switch engagement, if switch works (clicks) but heater does not, go to oTHERS.
Check all wiring and connections, if faulty go to oTHERS.
Consult a qualified electrician for all suspected electrical faults or contact a Sealey authorised dealer.
with the environment.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
01284 757500
01284 703534
.
www.sealey.co.uk
Web
sales@sealey.co.uk
email
CH2013
Issue: 1 - 19/04/13
Advertisement
