Clas Ohlson ACPP-7388 Quick Start Manual

USB adaptor for 2x PlayStation
connections
Article number 38-2649 Model ACPP-7388
Please read the entire instruction manual before using and save it for
future use. We apologise for any text or photo errors and any changes of
technical data. If you have any questions concerning technical problems
please contact our Customer Service Department.

Product Description

USB converter making it possible to connect two gamepads:
PlayStation®, PSone™ or PlayStation®2. Compatible with Windows XP/
Vista 32 bit/Windows 7 32 bit.
The supplied software program (Profile Editor) only needs to be instal-
led if you want to use all possible settings for the control and to use the
vibration function (only for XP and Vista 32).
Set desired keys on the keyboard and mouse that the gamepad can
accede. Several different game profiles can be created and saved.
Installation
1. Connect the USB adaptor to a vacant USB port.
2. The computer will find the USB adaptor automatically and
will install necessary drivers.
3. Connect one or two gamepads to the USB adaptor
Note! The supplied software program (Profile Editor) only needs to
be installed if you want to use all possible settings for the control
and to use the vibration function (only for XP and Vista 32).
- Several games have their own menus with settings, recommended
to use especially for beginners.
- The supplied software program is most suitable for skilled users
that completely understand what the different settings implicate.
Install the supplied software program
1. Insert the supplied CD into
the computer's CD-ROM.
Click Software.exe when
the disc starts.
Then click Next.
GREAT BRITAIN • for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
2. Click Next on the following squares...
3. Click Finish when the
installation is done.
The USB adaptor is
shown in Control panel/
Game units as XPAD PC
Converter.
4. Click Properties to open
the installation menus.
Test Page will show current
status.
5. You can calibrate the
gamepad under the tab
Calibration.
6. Installations for vibration
(only applicable for XP and
Vista 32) can be found under
the tab Effect Page.
7. Click Program/xpad/PSX
Converter profile Editor to
open the supplied software
program. Select Edit Profile and
create a Profile (separate instal-
lation manual) that can be saved
and loaded again.
8. The PC Converter program
will open with several
installation possibilities.

Troubleshooting

When installing the driver, the error notification that a file can't be copied
may occur. This is solved by copying "Setup.exe" from the CD to any
place on the hard drive, and starting the file from the hard drive instead
of the CD.
Disposal
Follow local ordinances when disposing of this product. If you are unsure
about how to dispose of this product contact your municipality.