Card setting is commenced.
If the result is OK, click on Next (26).
If the result of the setting is not correct
and an error appears on the screen, or
the values (Peak Value) are below
200, the volume of the surveillance
signal may be too low. Click on the
Back button (28) to return to the
previous screen.
Select the Options tab (29) and
increase the level of the detection
signal tone (30) and (31).
Click on Next (32) and proceed to set
the line surveillance once again.
SU-114N version 1.3
SU-114N
(27)
(29)
Amplifier, speakers line
and critical path surveillance unit
(28)
A summary of the settings entered
appears on the screen.
Surveillance of the zone has now been
set.
Select
Exit
(26)
procedure for the remaining zones.
(30)
(31)
R&D Department
(26)
and
repeat
the
(32)
25