Final Decommissioning - Viessmann Vitobloc 200 EM-20/39 Operating Instructions Manual

Shutdown and decommissioning
7.2

Final decommissioning

●
Before dismantling, the CHP unit must be
disconnected electrically by an electrician. All
connections to the power supply must be broken
mechanically.
●
Depressurise the heating water and coolant pipes.
●
Drain and dispose of heating water and coolant
containing glycol. Remove starter batteries when
the engine is cold and stationary.
●
Observe the safety instructions for handling the
aforementioned media as well as the applicable
regulations for disposal.
●
Remove all pipework and cables before lifting the
CHP unit.
●
Use a forklift truck to place the EM-20/39 on a
transport pallet and secure it with ratchet straps.
Disposal
Deliver used batteries to a collection point. Observe
the transport regulations (GGVS) during transportation.
Never dispose of used batteries with domestic
waste.
40
Operating instructions VITOBLOC 200 EM-20/39