Control Unit Functions - Viessmann Vitobloc 200 EM-20/39 Operating Instructions Manual

Operation
5.5

Control unit functions

5.5.1 Programming and display field on control panel
Fig. 11 Programming and display field with 2 default screens
Menü
Betrieb
Betriebsstunden
Motor
Generator
Detail
Heizung
Pufferspeicher
Übersicht
The default screen as start screen shows the CHP
system with its components.
The graphics on the display and the self-explanatory
icons enable simple and intuitive operation of the
control unit.
Control level 1 includes all default screens.
Subject to the number of components to be controlled,
one or more default screens are possible. They are
selected using the arrow buttons "more ►" and "more
◄".
All default screens are available with the "All OK check
mark" or with current operating data.
Control level 2 includes the operating level.
Touch the relevant component field in the default
screen to open the respective operating screen for the
component.
In the operating level, additional operating and
measurement data can be called up and a limited
number of settings can be made.
Control level 3 is the setting level. It is reserved for
trained service personnel with password authorisation.
VITOBLOC 200 EM-20/39 Operating instructions
Menu
Operation
Hours run
Motor
Generator
Detail
Heating
Buffer cylinder
Overview
Display button functions
:
Back
to default screen with check
marks
Back
to previous screen
Change from default screen
with "All OK check marks" to
display of operating data
Change from default screen
with operating data to display
with "All OK check marks"
Arrow button RIGHT
Change to further default
screens
Arrow button LEFT
Change to further default
screens
Display
of current faults
Calls up menu
"Customer-specific
settings"
Start/Stop
button
Automatic mode
ON/OFF
indicator
Heating operation
ON/OFF
indicator
User
Display of current
date and time
19