OPERATING INSTRUCTIONS 1° Operating conditions When operating under positive suction head, fill the pump by opening the suction gate valve slowly and completely, keeping - For clean liquids without abrasives, without suspended solids the delivery gate valve open to release the air. non explosive, non aggressive for the pump materials, with a With three phase motor check that the direction of rotation is as maximum temperature of 60 °C.
SAFETY MEASURES MESURES DE SÉCURITÉ • Carefully read the operating instructions before assembly and • Lisez attentivement ce mode d’emploi avant de procéder au start-up. The appliance must not be used by persons who montage et à la mise en service. are not thoroughly acquainted with the instruction handbook L’utilisation de la pompe est interdite aux personnes ne (operating instructions).
Page 4
FAULTS CAUSES REMEDIES Pump does not start - lack of electrical current - make sure the mains voltage is - rotor blocked , thermal suitable protection tripped - disassemble and clean the pump - unclamp the pump - intake valve not in water - pump intake valve in water Pump does not suck - no water in pump body...
Need help?
Do you have a question about the KFM and is the answer not in the manual?
Questions and answers