Emergency Off Switch - Mercedes-Benz Atego Manual

Towing - recovery
Table of Contents

Advertisement

Electrical system

EMERGENCY OFF switch

Vehicles used to transport hazardous goods are equipped with two EMERGENCY OFF switches. The switches
are used to interrupt the power supply in an emergency. This prevents short circuits with sparks which may
ignite a fire or an explosion.
Risk of accident
Press the EMERGENCY OFF switch only in the event of danger and only when the vehicle is stationary; never
while driving. The EMERGENCY OFF switch kills the engine automatically, i.e. the power steering is
inoperative as well. The vehicle can only be steered with increased effort.
EMERGENCY OFF switch on dashboard
Interrupting the power supply
Open cover.
Pull out switch pin 1.
All consumers are disconnected from the battery
with the exception of the tachograph.
Restoring the power supply
Turn the vehicle key in the steering lock all the
way back.
Press cover down until it clicks into place.
Turn vehicle key in steering lock to drive position.
EMERGENCY OFF switch on battery carrier frame
Interrupting the power supply
Open cover.
Swing switch lever 2 up.
All consumers are disconnected from the battery
with the exception of the tachograph.
Restoring the power supply
Press cover all the way down.
The EMERGENCY OFF switch is switched off and
the power supply is restored.
60
Guidelines for Breakdown Services (Subject to technical modifications)
i
G

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Atego and is the answer not in the manual?

Table of Contents

Save PDF