Topping up engine oil
The filler neck for the engine oil is at the front of the vehicle behind the maintenance flap.
If the oil level in the engine is too low or too high, the
status indicator lights up yellow and the display
N
shows
and the necessary top-up quantity, or
O
.
If a correct engine oil level reading is not possible,
P
the display shows
and a message.
i
Add the displayed top-up quantity only when the display
Open maintenance flap.
Unscrew and remove cap 1 on oil filler neck.
Top up engine oil.
!
Only use approved engine oils of the specified SAE grades.
If too much engine oil is added, drain off or extract the excess.
Fit cap 1 on oil filler neck and screw tight, check for tight seating and check for leaks.
Close maintenance flap.
Guidelines for Breakdown Services (Subject to technical modifications)
Oil level in engine
N
appears. Add the full recommended quantity.
49
i
Need help?
Do you have a question about the Atego and is the answer not in the manual?