Mercedes-Benz Atego Manual page 43

Display message with red status indicator
Standard Plus onboard
onboard computer:
computer:
£ £.
The braking
behavior may
change.
{ª {.
ª
Immediate
service
required
¢ « ¢.
«
Brake
reservoir
pressure too
low
Possible cause/consequence Possible remedy
Risk of accident
Malfunction in brake system of
vehicle (indicator lamp
lights up). The handling and
braking behavior may change.
Risk of accident
The CAN bus, the data transfer
system to the instrument panel,
has failed.
The display can no longer show
important information
concerning the operational
safety of the vehicle.
Risk of accident
The reservoir pressure in the
spring-loaded brake and/or
service brake circuit is too low.
Possible causes are excessive
compressed air consumption
while maneuvering or a leak in
the compressed air system.
The operational safety of the
vehicle is at risk.
Guidelines for Breakdown Services (Subject to technical modifications)
Instrument panel
Have the brake system checked at a
G
qualified workshop.
j
Stop the vehicle as soon as possible
G
taking into account the traffic situa-
tion.
Switch off engine and apply parking
brake.
Notify a qualified specialist work-
shop.
Stop the vehicle as soon as possible
G
taking into account the traffic situa-
tion.
Apply parking brake.
Run the engine to top up the com-
pressed air supply.
Do not continue to drive until the
STOP lamp has gone out.
Check the compressed air brake
system for leaks.
Have the compressed air brake sys-
tem checked at a qualified work-
shop.
41
i