Raising by the leaf springs (construction site vehicles only)
!
In certain vehicles a crossmember may be
installed under the spring mounting. The spring
support 1 cannot be used on these vehicles.
Only unladen vehicles should be raised by the leaf
springs.
Install jointed spring support 1 in the support
fixture or lifting device and secure.
Fasten lifting device with spring support 1 to
leaf spring and secure.
Secure the vehicle with a chain hoist 2 to pre-
vent it from slipping.
Guidelines for Breakdown Services (Subject to technical modifications)
Towing
115
i
Need help?
Do you have a question about the Atego and is the answer not in the manual?