Appliance Description - Timberk DH TIM 10 E5 Instruction Manual

4. APPLIANCE DESCRIPTION

Identification of parts
Front
Fig. 2.
1. Control panel
2. Air intake grille
3. Water bucket
4. Water level window
5. Handle se outlet
6. Air filter (behind the air intake grille)
7. Air Outlet grille
8. Drain hose outlet (see page 7)
9. Power cord band (Used only when storing the unit.)
10. Power Cord
11. Power Plug
NOTE:
All the pictures in the manual are for explanation
purposes only.Your unit may be slightly different.The
actual shape shall prevail.The operations and functions
are the same.
4
www.timberk.com • Electric drier for changing of air humidity
Positioning the unit
A dehumidifier operating in a basement will have little or no effect in
drying an adjacent enclosed storage area, such as a closet, unless here is
adequate circulation of air in and out of the area.
• Do not use outdoors.
• This dehumidifer is intended for indoor residential applications only. • This
Rear
dehumidifier should not be used for commercial or industrial applications.
• Place the dehumidifier on a smooth, level floor strong enough to support
the unit with a full bucket of water.
• Allow at least 20cm of air space on all sides of the unit for good air
circulation.
• Place the unit in an area where the temperature will not fall below
5OC(41OF). The coils can become covered with frost at temperatures
below 5OC(41OF), which may reduce performance.
• Place the unit away from the clothes dryer, heater or radiator.
• Use the unit to prevent moisture damage anywhere books or valuables
are stored.
• Use the dehumidifier in a basement to help prevent moisture damage.
• The dehumidifier must be operated in an enclosed area to be most
effective.
• Close all doors, windows and other outside openings to the room.
Fig. 2.