Table of Contents
Advertisement
Connecting peripheral equipment
The
socket has audio and video inputs/outputs and RGB inputs.
EXT1
The
socket has audio and video inputs/outputs and S-VHS inputs.
EXT2
For further information, see glossary (p. 20).
Video recorder
• If your video recorder has a euroconnector socket, carry out the above
connections. Euroconnector sockets ensure better picture quality.
• If your video recorder does not have a euroconnector socket (or if this is already
being used by another device), then the only connection possible is via the aerial
cable.Your video recorder is then considered as a TV programme by your TV set.
You will therefore need to tune in your video recorder's test signal and assign it
programme number 0 (see manual store chapter, p. 5).
To reproduce the video recorder picture, press the
Refer to your video recorder's operating instructions concerning the test signal
(the video recorder must be equipped with an HF modulator).
Other equipment
Connect to socket
To select connected equipment
• Use
key to select
Most equipment (decoder, video recorder) carries out the switchover itself.
• The white
key may also be used to select the sockets with adapted Smart
Controls:
E1 DIGITAL
(for games connected to
the
socket on the front panel).
VIDEO
(satellite receiver, decoder, CDV/CDI, games...)
(or to
if it produces a
EXT1
EXT2
,
E1 (EXT1)
E2 (EXT2)
(for digital equipment connected to
) and
EXT1
E2 GAMES FRONT
...with Decoder
key.
signals).
S-VHS
or, for S-VHS or Hi-8 equipment,
EXT1
(for game connected to
.
E2 Y/C
),
E1 GAMES BACK
17 17
Advertisement
Table of Contents
