BayTech DS-RPC Quick Start Manual page 7

Figure 9: Host Module Menu
Module:
Attention Character: ]
Device A ................1
Device B ................2
Device C ................3
Device D ................4
DS-RPC ................5
Configure.......................C
Status..........................S
Unit Reset......................RU
Logout..........................T
Enter Request :c
Figure 11: DS-RPC Configuration Menu
1)...Manage Users
2)...Change Outlet Name
3)...Enable/Disable Confirmation
4)...Enable/Disable Status Menu
5)...Change Unit ID
6)...Change Alarm Threshold
X)...Exit
Enter Request :1
Type the letter "A" at the prompt to add a
user.
Type the name of user.
Select number of user.
Type "1" or "3" to add outlets.
Figure 10: Module Configuration Menu
Configuration
DS62
DS74
DS-RPC
Enter Request :3
Figure 12: Add User Menu
---------------------------------------------
| User
|
---------------------------------------------
---------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
Enter user number to assign Outlets, A, D or R.
Enter Request: a
Enter user name: engineer
---------------------------------------------
1)...engineer
---------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
Enter user number to assign Outlets, A, D or R.
Enter Request: 1
---------------------------------------------
| User
|
---------------------------------------------
| engineer
---------------------------------------------
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Enter Request: 1
Enter Outlet number(s): 1,3
module #1.........1
module #2.........2
module #3.........3
| Assigned Outlets
| 1 | 2 | 3 |
| N | N | N |
| Assigned Outlets
| 1 | 2 | 3 |
| N | N | N |
|
4 |
N |
|
4 |
N |