Figure 3-8 Fix Front And Rear Mounting Ears - H3C S5500-EI Series Quick Start Manual

Quick Start
H3C S5500-EI Series Ethernet Switches
5) Hold the bottom of the switch with one hand and the front
part of the switch with the other hand, and push the switch
into the cabinet gently, as shown in Figure 3-8.
Front mounting ear
Screw 1: Used to bear the weight
Screw 2: Used to fix rear mounting ears to rear brackets

Figure 3-8 Fix front and rear mounting ears

After the switch is pushed into the cabinet, ensure that the upper
edge of rear mounting ears is tightly contacted with the load-bearing
screw, as shown in Figure 3-9.
Rear mounting ear
Front square-holed bracket
Screw 1
Rear panel
3-10
Chapter 3 Installation
Screw 2
Rear square-holed
bracket