Installation Instructions; Tools You Will Need; Electrical Requirements - Silhouette Renoir SR001 Owner's Manual

INSTALLATION INSTRUCTIONS

We strongly recommend having a professional complete the installation of this unit.
To avoid personal injury to yourself and/or property, have someone assist you during the installation

Tools you will need:

• Philips screwdriver
• Drill and drill bit
• Level
• Measuring tape
• Pencil
• Tape or push pin
• Stud fi nder
INSTALLATION INSTRUCTIONS
1. Open packaging.
• Cut carton straps.
• Lift off top of carton box.
• Remove paper template.
2. Choose a location.
• Use the paper template to visualize and mark
where the unit will be installed.
• The purpose of the paper template is to
help choose a location for the unit, to create
guidelines to show where to mount the
securing bracket and to help determine if it will
be necessary to to have a certifi ed electrician
install a power outlet for the unit.
• Do not install the unit into a corner or directly
beside a wall as this will impede the door
opening.
• The unit can accommodate baseboard
moldings with a maximum height of 22 cm
(8.5 in) and a maximum depth of 4 cm (1.5
in).
3. Unpack the unit.
• With the help of an extra person, take the
foam pieces that are on top of the unit and lay
them on the fl oor.
• Cut two corners out of the side of the carton
and fold the long side down.
• Slide the unit out of the folded side and onto
the foam pieces on the fl oor to protect the
back of the unit from damage.
CAUTION
process. Gloves and safety goggles should be worn.

Electrical Requirements:

The appliance must be connected to an
individual, properly grounded electrical
outlet, protected by a 15 or 20 ampere
circuit breaker or time delay fuse.
Cut
3