Leica SUMMARON-M 1:5,6/28mm Instructions Manual page 15

Table of Contents

Available languages

Bayonet fitting

Filter mount

Lens hood

Viewfinder

Finish

Dimensions and weight

Length of the bayonet fitting con-

tact surface

Largest diameter

Weight

Compatible cameras

For 35mm (24 x 36mm):

The 6 bit lens identification bar code (6) situated on the bayonet flange enables the digital Leica M models

to identify the attached type of lens. This information is utilized by the cameras to optimize exposure and

image data.

All Leica M cameras without 28 mm frame lines, except for those with 0.85x viewfinder, the M3 and the

previous MP (professional version of the M3), can be equipped with this by the Customer Care department

of Leica Camera AG (Address, see p. 10, or warranty card) (then appears together with the 90 mm frame

lines).

Use on the Leica M8 is not recommended because the necessary UV/IR corrections filters are not

available.

Leica M quick-change bayonet with 6 bit lens

identification bar code for digital M models

Internal thread for screw-on filter E34, with

non-rotating focusing mount

Clip-on (in delivery scope)

Camera viewfinder

Silver chrome finish

approx. 18mm

approx. 51mm

approx. 165g

All Leica M cameras

Table of Contents