LG 27HK510S Owner's Manual page 11

Wall Mount (mm)
100 x 100
Standard screw
M4 x L10
Required screws
4
Wall Mount Plate (optional) RW120
NOTE
• The screws (M4 x L10) can be found fastened in the wall mount screw holes on the back of the monitor.
• Use the screws specified by VESA standards.
• The wall mount kit includes an installation manual and the necessary parts.
• The wall mount plate is an optional item. You can obtain additional accessories from your local dealer.
• The length of screws may differ depending on the wall mount. Be sure to use the proper length.
• For more information, please refer to the manual for the wall mounting bracket.
CAUTION
• Disconnect the power cord first. Then move or install the monitor. There is risk of electric shock.
• Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
• Applying excessive force when tightening screws may damage the monitor. Such damage is not covered by the
product warranty.
• Use the wall mounting bracket and screws that confirm to VESA standards. Damage caused by the use or
misuse of inappropriate components is not covered by the product warranty.
• When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall mount plate
Screw specifications
Back of the monitor
Wall mount plate
Back of the monitor
: M4 x L10
Max. 8 mm
11