Function description
Fig. 8: Rear of reader
1 Clamps for connecting the interconnecting cable to the controller (the terminals marked "NC" are not
needed)
2.4
Optional extensions
2.4.1 Extension: WTX 200 I/O board (optional)
Fig. 9: I/O board additional module
The number of connections to the controller can be extended using the WTX 200 I/O board.
Six additional connections to the controller are provided (Fig. Fehler! Verweisquelle konnte nicht gefunden
werden./2). These connections can be configured as inputs or outputs as required by placing jumpers and
then they can be occupied.
21