Usb Driver Installation And Setup For Windows; Introduction - C.E.C. DA5 Owner's Manual

Introduction

The USB Interface equipped with DA5 is compatible
to USB 2.0 audio device.
It is necessary for Windows PC users to install special
driver for PCM music fi les, which is possible to download
from the CEC home page.
When ASIO and DSD drivers are installed to a
freeware PC music player, foobar2000, DSD fi les may be
reproduced. This is to explain on how to install and set up
those drivers using foobar2000.
Compatible OS: Windows XP, Windows Vista,
Windows 7, Windows 8, Windows 10
Mac PC (X10.6.8 or newer) are already equipped with
a standard driver for USB 2.0 audio device, and it is not
necessary to install CEC specifi c driver.
Download site
Windows users may access to download this specific
driver at CEC home page.
□ http://www.cec-web.co.jp/service/download/driver/
index_ex.html
Note: It is not abnormal to see SECURITY WARNING
upon downloading and/or installation. You may continue
to download and/or install according to the instructions by
OS or Browser.
14
USB driver
installation and setup
for Windows
USB Driver (Your PC recognizes DA5 as a
regular audio device.)
□ BRAVO-HD (is the USB driver specialized in DA5,
supplied by SAVITEC, USB Audio IC manufacturer.)
Necessary components to reproduce DSD
fi les at foobar2000
□ foo_out_asio_v2p1p2.fb2k-component (ASIO driver
by foobar 2000)
□ ASIOProxyInstall-0.7.2.exe (driver for the reasonable
connection between ASIO and DSD)
□ foo_input_sacd.fb2k-component (DSD driver by
foobar 2000)
Note: The above are the possible components
publicized on our internet. Updated version at DA5
might not be assured.
Note: Freeware PC-music player foobar2000 can be
downloaded at: http://www.foobar2000.org/