Miele KM 320 Converting Instructions page 25

Check the intake air
a Lock screw
b Air sleeve
Gap X must measure:
– 1/2" (13 mm) for natural gas
– 1/4" (6.5mm) for LP (propane) gas
^ To adjust the gap, loosen the lock
screw and slide the air sleeve in or
out as necessary.
^ Tighten the lock screw and
reassemble the cooktop in reverse
order.
Check all fittings for gas leaks
before reassembling the cooktop.
Converting KM 406
After conversion
^ After converting the cooktop, affix the
label supplied with the conversion kit
on to the data plate over the type of
gas stated.
^ Check that there are no leaks e.g,
with soapy water.
^ Check that the burner is correctly
assembled.
^ Turn on the gas supply.
Light each of the burners in turn.
When set at "low" or when the control
knob is quickly turned from "high" to low
the flame should not go out.
When set at "high" the gas flame must
burn with the center clearly visible.
25