Miele KM 320 Converting Instructions page 17

Changing the jets
^ Using a 7 mm nut driver or socket
wrench, unscrew the jet, c.
^ Install the new jet according to the
table and reassemble the burner
head, b, burner cap, a, and grates.
^ Save the jets and needle valves
removed from the appliance for future
use.
^ Check that there are no leaks e.g.
with soapy water.
^ Replave the control knobs.
^ Turn on the gas supply.
^ Light each of the burners in turn.
^ After converting the cooktop, affix the
label supplied with the conversion kit
next to the data plate underneath the
appliance.
Converting KM 360
The flame should not go out when set
at "low" or when the control knob is
quickly turned from "high" to "low".
When set at "high" the gas flame must
burn with the center clearly visible.
When installed properly, the flame will
be steady and quiet. It will also have a
sharp, blue inner core that will vary in
size depending on the burner. Flame
adjustment will not be necessary.
17