Miele KM 320 Converting Instructions page 13

After conversion
– After converting the cooktop, affix
the label supplied with the
conversion kit next to the data plate
underneath the appliance.
– Check that the regulator has been
converted.
– Check that there are no leaks e.g.
with soapy water.
– Reassemble the appliance in reverse
order.
– Check that the burners are correctly
assembled.
– Turn on the gas supply.
– Light each burner in turn.
Converting KM 342 / 344
The flame should not go out when set
at "low" or when the control knob is
quickly turned from "high" to "low".
When set at "high" the gas flame must
burn with the center clearly visible.
When installed properly, the flame will
be steady and quiet. It will also have a
sharp, blue inner core that will vary in
size depending on the burner. Flame
adjustment will not be necessary.
13