Table of Contents
Advertisement
Unity integration
This section provides an example for content developers to enable Vive Tracker in VR content
by using Unity game engine.
First, you need to make Vive Tracker detectable in SteamVR. Assume that you have two Vive
controllers already, and you have plugged in the dongle
computer's USB port. Right-click on one of the existing controller's icon and click "Pair
Controller" in the pop-up menu (shown in figure below). Press the Power button on Vive
Tracker for 2 seconds, and then release it to enter the paring mode.
After paring is successful between the Vive Tracker and the dongle, you will see that the Vive
Tracker is detected in the SteamVR
Vive Tracker
HTC Corporation
Figure: Pair Vive Tracker
UI.
Figure: Vive Tracker is added in SteamVR
Developer Guidelines
07/17/2017
Ver. 1.5
into the dongle cradle to
33
the
HTC Confidential and Proprietary
Advertisement
Table of Contents
