Penton RCS6/T Installation Instructions

ROUND METAL
CEILING
LOUDSPEAKERS
f
RCS6/T

INSTALLATION INSTRUCTIONS

Hole cutout
190mm
f
STEP 1
Cut the required hole for the speaker
FITTING THE SPEAKER
f
STEP 3
Compress "V" spring and fit into the retaining ear within the
bracket.
Connect cable to terminal block and select wattage required.
Penton UK Ltd
Unit 2 Teville Industrials
T: +44 (0)1903 215315
www.pentonuk.co.uk
f
STEP 2
Loosen the retaining sliders and push to the top of the bracket.
Once the bracket is through the hole pull down the sliders and
tighten the retaining nut clamping the ceiling
f
STEP 4
Fit second "V" clip into second retaining ears and gently push the
speaker up into the bracket (do not push the central perforated grille
area) the speaker will self locate into the bracket.
RCS6/T
Circuit diagram 100V Common
| Dominion Way | Worthing
| F: +44(0)1903 215415 | E: sales@pentonuk.co.uk
0.25W
0.75W
1.5W
3W
6W
| West Sussex | BN14 8NW
NOVEMBER 2011
RoHS