Layout Contents - Asus Pro WS X570-ACE Manual

1.2.1

Layout contents

Connectors/Jumpers/Slots
1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
2. AMD AM4 CPU socket
3. DDR4 DIMM slots
4. CPU, CPU optional, chassis, and AIO pump fan connectors (4-pin CPU_FAN, 4-pin
CPU_OPT, 4-pin CHA_FAN1~3, 4-pin AIO_PUMP FAN)
5. USB 3.2 Gen 1 connector (20-1 pin U32G1_12; U32G1_34)
6. SATA 6Gb/s connector (7-pin SATA6G_1-4)
7. Mini-SAS HD connector (U.2)
8. System panel connector (20-3 pin PANEL)
9. USB 2.0 connector (10-1 pin USB1112; USB1314)
10. Node connector (12-1 pin NODE)
11. Thermal Sensor connector (2-pin T_SENSOR)
12. Clear RTC RAM (2-pin CLRTC)
13. Clear LAN Password (3-pin LAN_PWD)
14. Serial port connector (10-1 pin COM)
15. Front panel audio connector (10-1 pin AAFP)
16. PCI Express 4.0/3.0 x16 slots
17. PCI Express 3.0/2.0 x1 slots
18. M.2 sockets (M.2_1(SOCKET3); M.2_2 (SOCKET3))
ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)
Correctly orient the ATX power supply plugs into these
connectors and push down firmly until the connectors
completely fit.
•
•
•
1-2
The 8-pin Power Plug LED lights up to indicate that the 8-pin power plug is not
connected.
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides
a minimum power of 350 W. This PSU type has 24-pin and 8-pin power plugs.
We recommend that you use a PSU with higher power output when configuring a
system with more power-consuming devices or when you intend to install additional
devices. The system may become unstable or may not boot up if the power is
inadequate.
EATX12V
PIN 1
EATXPWR
+3 Volts
+12 Volts
+12 Volts
+5V Standby
Power OK
GND
+5 Volts
GND
+5 Volts
GND
+3 Volts
+3 Volts
PIN 1
Chapter 1: Product Introduction
Page
1-2
1-3
1-3
1-3
1-3
1-3
1-4
1-4
1-5
1-5
1-5
1-5
1-5
1-6
1-6
1-6
1-6
1-8
GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts