Philips Satinelle super sensitive HP6444/00 Manual page 8

ENGLISH
8
Using the appliance
General information about epilation
Epilating with the Satinelle super sensitive will leave your skin
smooth and hair-free for weeks.As epilation may cause skin
irritation or ingrown hairs in some women, we advise you to read
the text below.
When you use the appliance for the first time, we advise you to
try it out on an area with only light hair growth to get
accustomed to the epilation process.
This appliance has been extensively tested on the underarms and
the bikini line. Some women will develop skin irritation when
they epilate these areas for the first time.We therefore advise
you to try out the appliance on a small patch of skin first.
After epilation you can apply a mild cream or body milk to
soothe your skin and reduce skin irritation.
Epilation is easier just after taking a bath or shower. Make sure
your skin is completely dry when you start epilating.
We advise you to epilate before going to bed at night, as this will
allow any skin irritation that may develop to diminish overnight.
How to use the epilator
Make sure your skin is clean, entirely dry and free from grease.
Do not use any cream before you start epilating.
1 Put the adapter plug (J) in the wall socket.
2 Insert the appliance plug (H) into the inlet socket (G) (fig. 2).
3 Remove the protective cap (A) (fig. 3).
4 Switch the appliance on by pushing the on/off slide (F) to the
desired speed setting.
Select speed I (fig. 4) for areas with little hair growth and for areas
where bones are located directly beneath the skin, such as knees and
ankles. Select speed II (fig. 5) for larger areas with stronger hair growth.