Advertisement
Legends - Renegade GPS Speedometer Cluster -
(Fuel Level Calibration, Tachometer Calibration, Set Odometer, and About Screen)
Follow these steps below for all menu items
1. Press and hold button down while turning on gauge power to enter the calibration menu.
2. A quick button press will toggle LCD screen through all the available menu settings and display.
3. Press and hold to select the menu item (2-3 seconds).
4. Press and hold button to change setting.
Use the "TACH CAL." menu to calibrate the TACHOMETER Pulses Per Rev (PPR) [available on some models]:
Repeatedly press the button to toggle through the following PPR options:
(Press and hold to set a selected PPR)
Use the "FUEL CAL." menu to calibrate the the ohm range for the FUEL LEVEL:
Repeatedly press the button to toggle through the following OHM ranges:
(Press and hold to set a selected Ohm range)
How to calibrate the FUEL LEVEL gauge to custom Ohm Range:
After toggling through the Ohm ranges there will be an "EMPTY"
option and a "Full" option.
EMPTY option: While your fuel tank is empty press and hold to set.
FULL option: While your fuel tank is full press and hold to set.
EMPTY
FULL
TOGGLE TO CHANGE.
TOGGLE TO CHANGE.
HOLD TO SELECT.
HOLD TO SELECT.
Use the "Set Miles" menu to set the Odometer miles:
Repeatedly press the button to toggle through the digits:
(Press and hold to cycle the numbers 0-9)
To save: do not press the button for 5 seconds.
Use the "About" screen to view manufacturing date and other diagnostic information:
Gauge Operation Instructions
CHART 1:
Empty
0 ohms
0 ohms
16 ohms
73 ohms
240 ohms
10 ohms
15 ohms
000000
MI
1. HOLD TO SCROLL.
2. QUICK TO TOGGLE
- 7 -
Common Factory Ohm Ranges
Full
30 ohms
Most pre-'65 GM
90 ohms
158 ohms
8-12 ohms
Most Fords before
Use with 3262
70 ohms
Ford Bi- Metallic
Gauges (pre 1987
F-Series Trucks)
160 ohms
Gauges (1987 and
later F-Series Trucks)
Vehicle
Application
Most GM
'65-present
Most Fords
'87-present
'87 and most
Chrysler
sender
Ford Magnetic
Advertisement
