Download  Print this page

Black & Decker 905180165 Instruction Manual page 7

Black & decker vacuum cleaner instructions manual
Hide thumbs

Advertisement

Features
This appliance includes some or all of the following features.
1. Hose
2. Container handle
3. Filter cleaning switch (not VN1800N)
4. On/off switch
5. Handle
6. Cord rewind button
7. Suction head
8. Wheels
9. Container
10. Extension tube
11. Airflow control switch
In addition, this appliance is supplied with some or all of the
following accessories (fig. A):
12. Crevice tool
13. Brush tool
14. Parquet floor head (VN2010 / VN2200 / VN2400)
15a.Large turbo brush (VN1800T / VN2200 / VN2205 /
VN2400)
15b.Mini turbo brush (VN2000C)
The parquet floor head is not included with all models. This
accessory is available from your Black & Decker dealer /
service centre (cat. no. WV100).
The large turbo brush is not included with all models. This
accessory is available from your Black & Decker dealer /
service centre (Cat. No. WV200).
The mini turbo brush is not included with all models. This
accessory is available from your Black & Decker dealer /
service centre (Cat. No. WV300).
Assembly
Connecting the hose (fig. A)
Insert the hose connector (16) into the inlet (17) of the
appliance.
Line up the hose connector tabs with the slots in the inlet.
Slide the hose further until the release buttons (18) (2
positions) click into place.
To disconnect the hose, press the release buttons (18) (2
positions) and pull out the hose.
Mounting the extension tube (fig. A)
Press the lock button (19) and slide the hose nozzle (20) into
the tube (10) until it clicks into place.
To remove the tube (10), press the lock button and pull the
hose nozzle (20) out of the tube.
Mounting the suction head (fig. A)
The suction head (7) allows for vacuuming on carpet and
hard surfaces (e.g. laminate and tiles).
7
Press the lock button (21) and slide the tube (10) into the
head (7) until it clicks into place.
To remove the head (7), press the lock button (21) and pull
the tube (10) out of the head (7).
VN2010 / VN2200 / VN2400 - Mounting the parquet floor
head (fig. A)
The parquet floor head (14) allows for vacuuming on wooden
and polished surfaces.
Press the lock button (21) and slide the tube (10) into the
head (14) until it clicks into place.
To remove the head (14), press the lock button (21) and pull
the tube (10) out of the head.
VN1800T / VN2200 / VN2205 / VN2400 - Mounting the
large turbo brush (fig. A)
The large turbo brush (15a) allows for vacuuming on cut pile
carpeting.
The brush is particularly useful for picking up hair, threads,
etc., as well as for refreshing trodden-down carpet pile.
Press the lock button (21) and slide the tube (10) into the
head (15a) until it clicks into place.
To remove the head (15a), press the lock (21) button and
pull the tube (10) out of the head.
VN2000C - Mounting the mini turbo brush (fig. A)
The mini turbo brush (15b) allows for vacuuming on cut pile
carpeting and is especially ideal for stair cleaning.
The brush is particularly useful for picking up hair, threads,
etc., as well as for refreshing trodden-down carpet pile.
Press the lock button (21) and slide the tube (10) into the
head (15b) until it clicks into place.
To remove the head (15b), press the lock (21) button and
pull the tube (10) out of the head.
Mounting accessories (fig. A)
The crevice tool (12) allows for vacuuming in narrow and
hard to-reach places. The brush tool (13) allows for
vacuuming on furniture, blinds, curtains, windows and stairs.
The accessories can be mounted on both the hose (1) and the
tube (10).
Press the lock button (19 or 21) and slide the accessory onto
the hose nozzle (20) or the tube (10).
To remove an accessory, press the lock button (19 or 21)
and pull the accessory off.
When not in use, the accessories can be stored on the
accessory holder (22). The accessory holder is stored on the
hose nozzle. This is clipped into place, to remove pull way
from the hose nozzle. The tools are stored as shown in fig. A.

Advertisement

loading