Page 2
Replacement Instructions, PCM 4.X Table of contents 1. REPLACEMENT OF THE POWER AND CONTROL MODULE (PCM 4.X) ......3 ........................ 3 ENERAL INSTRUCTION PCM 4.1 .................... 3 EPLACEMENT OF MODULE PCM 4.5 .................... 4 EPLACEMENT OF MODULE DEIF A/S Page 2 of 5...
Page 3
Please let us know if you do switch modules permanently, this will help us keep our records updated. Call us or send a fax to DEIF A/S, for the attention of the service department: Tel.: + 45 9614 9614 Fax: +45 9614 9615 ...
Page 4
ID-switch Address switch/jumpers on the PCM module If the dedicated software is not present, then contact DEIF to have the software sent by e-mail. Please refer to the manual for the utility software for further explanations regarding this software. Replacement of module PCM 4.5 Before replacing the modules, please take the following measures: Placement of I/O addr./jumpers PCM 4.5...
Page 5
ID-switch Address switch/jumpers on the PCM module If the dedicated software is not present, then contact DEIF to have the software sent by e-mail. Please refer to the manual for the utility software for further explanations regarding this software. DEIF A/S reserves the right to change any of the above.
Need help?
Do you have a question about the PCM 4 Series and is the answer not in the manual?
Questions and answers