Advertisement
Lotus VE
safety instructions/warning
Read and follow all instructions and warning before use.
• WARNING: PINCH POINT! KEEP HANDS CLEAR OF SUPPORT BARS DURING OPERATION.
SERIOUS INJURY MAY OCCUR.
• DO NOT EXCEED MAXIMUM STATED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY
DAMAGE MAY OCCUR.
• CAUTION: Lift hazard! Two people are required to move workstation. Serious injury may
occur.
• Ensure cable lengths are long enough and follow the cable routing instruction in this manual.
Failure to follow these instructions may result in equipment damage or personal injury.
• DO NOT lean on the keyboard platform.
• This product has a gas strut lift assistance and should never be used with less than 5 lbs. (2.2kg) of
weight.
• Make sure the desk or mounting surface is level and can support the combined weight of the
workstation and accessories.
• Remove all equipment and accessories from the workstation before moving.
• Manufacturer certifies that product meets or exceeds applicable ANSI/BIFMA standards.
contents
B base plate
A tower pole
E clamp bar
H m6X12mm bolt (6)
I m6X25mm bolt (3)
K m4X12mm bolt (8)
≤ 20 lbs
≤ 9.07 kg
≤ 5 lbs
≤ 2.27 kg
C platform
G dual vesa assembly
J m3X55mm allen key
K m4X55mm allen key
Page 3
Page 3
safety warnings
D vesa assembly
J cable clip
L m6X95mm allen key
M m8X80mm bolt (2)
N 13mm hex wrench (2)
Advertisement
