Advertisement
TIMER (COUNTDOWN TIMER) SETTING
- Press MODE/SET to advance to TIMER.
Your watch timer is preset to 30 minutes, but can be adjusted to count down
from 23hr 59min 59secs. Once the timer hits zero an alarm will sound for 30
seconds and the counter will then count upwards. This enables you to know
how long ago the alarm sounded.
- Press START/STOP to start or stop the Timer.
- HOLD LAP/RESET in for 2 seconds to reset the Timer to the preset time. You
must do this prior to being able to change the preset time of the timer.
ADJUSTING TIMER TIME to another time period, up to 23hr 59min 59secs.
- HOLD MODE/SET in for 2 seconds, the hour digits will appear and flash. Use
START/STOP & LAP/RESET to select hour you want.
- Press MODE/SET, the minutes will flash. Use START/STOP & LAP/RESET to
select minutes required.
- HOLD MODE/SET in for 2 seconds to confirm the time set.
ALARM (X2) SETTING
A separate alarm is provided for each time zone. Ie T1 and T2.
- Press MODE/SET to advance to ALARM.
- HOLD MODE/SET in for 2 seconds and T1 or T2 will appear.
Use START/STOP & LAP/RESET to select required time zone T1 or T2.
- Press MODE/SET, the hour digits will flash.
Use START/STOP & LAP/RESET to select required hour. Make sure you have
AM or PM correct in the alarm.
- Press MODE/SET, the minutes will flash.
Use START/STOP & LAP/RESET to select required minutes.
- HOLD MODE/SET in for 2 seconds to confirm the settings and the alarm icon
appears in the bottom left of the screen.
- Press START/STOP to turn the alarm icon on or off.
- Press any button to stop the alarm.
CHRONOGRAPH
Lap Time
Chrono Lap
2 secs
29
9
Advertisement
