Download Print this page

ABON Ultra Series Operating Instructions Manual page 2

Advertisement

Available languages

Available languages

English
Contents
Introduction
Product description
Symbols
Proper use, Guarantee
Informal safety measures
Safety instructions
Installation precautions
Safety features of the door operator system
Safety checks
Check overload cut-out
Controls and indicators
Installation preparation
Installation
Commissioning
Programming door operator
Programming with remote transmitter
Programming without remote transmitter
Program/Delete remote transmitter
Operation
Settings / Options
Warning phase
Automatic closure
Changing the direction of movement
Soft run
Reset
Fitting additional safety features
Safety rail / photo cell / optosensor
Emergency lock release
Optional lighting system/Warning light
Interfering frequencies
Self-test
General Problems / Troubleshooting
Changing the fuse
Changing the battery of the remote transmitter
Maintenance intervals
Declaration of conformity
Technical data
Replacement Parts
Accessories (Optional)
Removal, Disposal
Introduction
Read operating instructions carefully before installing and
commissioning. Pay attention to the graphics and all notes.
Product description
The remote transmitter provided and located in the housing of
the door operator is programmed to the door operator.
Packaging: Only reusable materials are used. Dispose of
packaging in an environmentally-friendly way and according
to the legal guidelines in your area.
Scope of delivery see page 123.
Symbols
The following symbols are used in this manual:
CAUTION Warning against personal injury and
material damage. Non-observance of instructions
marked with these symbols can result in serious injuries and
material damage.
NOTE: Important technical instructions that must
be observed.
Ultra
GB
Proper use, Guarantee
This door operator is suitable for use in domestic garages.
7
Any other use is deemed improper.
7
This product must not be used in a potentially hazardous
7
explosion atmosphere.
7
The following actions require express written approval by the
7
manufacturer:
7
• Modifications or attachments
8
• Use of parts other than factory authorized replacement
8
parts
8
• Repairs performed by persons or businesses that have not
been authorised by the manufacturer
8
If this approval is not granted, the guarantee and warranty
8
can become void.
8
We will not be liable for
8
9
• damage due to non-compliance with operating
instructions,
• or due to technical errors in connecting the door operator
9
and structural deformations that may occur during
9
operation,
9
• or as a result of inappropriate
door maintenance.
Informal safety measures
Keep the operating instructions handy for future use.
10
The inspection and test log book provided must be filled out
10
by the person carrying out the installation and kept by the
operator along with other documentation (door, door
operator).
10
11
Safety instructions
Safety instructions
The door operator may only be operated if the entire
range of motion is clearly visible. Be mindful of others within
the effective range of this product during operation.
11
Always disconnect electrical power when servicing the door
11
operator.
12
Actions prohibited during operation of a door operator:
12
• Passing or driving underneath a moving door.
12
• oLifting objects and / or persons with the door.
12
The door must only be operated if
• all users are familiar with its functions and operation.
• the door is in accordance with European Standards
EN 12 604 and EN 12 605.
• If the door operator is installed in compliance with
EN 12 453, EN 12 445 and EN 12 635.
• applicable, optional security features such as photo cell,
optosensor and entrapment protection system are fully
functional.
• garages without a second entrance have an emergency
lock release from the outside. This may be ordered
separately if necessary.
• any wicket door in the garage door is closed and is
equipped with a safety device that prevents activation
when the door is opened.
• oafter changing the basic factory setting of the operating
force (F1, F2) or after activating the automatic closure an
additional safety device such as a safety guide is installed.
7

Advertisement

loading

This manual is also suitable for:

Ultra s