Getting Started; Connect The Antenna; Connect The Mains; Remote Control - Philips 37PFL7332/10 User Manual

4

Getting started

4.1 Connect the antenna

Insert the aerial plug firmly into the aerial
1
socket x at the bottom of the TV.
L R
HDMI 1 HDMI 2 75 AUDIO IN AUDIO OUT
DIGITAL AUDIO OUT (DIGITAL)
HDMI

4.2 Connect the mains

Insert the mains cord supplied into the
1
mains at the bottom of the TV and in the wall
socket.
Warning
Verify that the mains supply voltage corresponds
to the voltage printed on the sticker at the rear
of the TV.
ANTENNA

4.3 Remote control

Insert the 2 batteries supplied.
1
Be sure the (+) and (-) ends of the batteries line
up correctly (markings are printed in the case)
For most keys pressing a key once will activate
the function. Pressing a second time will
undo the action.

4.4 Switch on the TV

Press the power switch B at the side of
1
the TV.
An indicator on the front of the TV lights up
and the screen comes on.
If the TV is in standby mode, press the -P+
2
keys or the B key on the remote control.

4.5 First time installation

The installation procedure consists of a series
of screens that will guide you through the
installation of your TV.
Follow the instructions on the screen.
Note
If the TV has already been installed before and/
or you want to change the First time installation
settings, proceed with Use of the 'TV menu
settings', p. 14.
7