Issues Referring To Connected Peripherals With A Hdmi Connector - Philips 37PFL7332/10 User Manual

15 Issues referring to
connected peripherals
with a HDMI connector
Note
Teletext will not be available via equipment
connected to a HDMI connector.
The connector allows the following
HDMI IN
TV and monitor display modes:
HD Standard Definition TV (SDTV) 640x480i
Enhanced Definition TV (EDTV) 640x480p
High Definition TV (HDTV)
PC VGA 640x480
SVGA 800x600
XGA 1024x768
• If necessary, you can adjust the picture
position to the centre of the screen with the
o or œ, p or π keys.
• Due to legal requirements, it is possible
that with certain copy protected PCM
audio qualities from a peripheral equipment
connected to the hdmi input, the Digital audio
output signal is muted.
• Your TV supports HDCP (High-bandwidth
Digital Content Protection). This is a system
for protecting DVD content outputted via
HDMI from being copied. It provides a secure
digital link between a video source (DVD, PC,
etc.) and your TV. Content is encrypted at
the source peripheral equipment to prevent
unauthorised copies from being made.
52
• Proper working is only guaranteed with
HDMI compliant consumer products. Limit
the cable length to max. 5 m.
• Digital peripheral equipments from different
manufacturers have the possibility of differing
output standards which may cause difficulties
for the television to properly display.
• In case no signal is detected from your HDMI
equipment, switch off the HDMI equipment
and then on again.
To get an optimal viewing, it is advised to
switch your DVD player, Blu-Ray of HD
settop box to the highest possible supported
720x480i display modes.
720x576i
720x480p
720x576p
1920x1080i
1280x720p