Querying Logs; Querying Component Status; Querying System Parameters - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
----End

7.1.2 Querying Logs

Context
The Query Logs screen displays the operations performed by the user.
Procedure
Step 1 On the home screen, choose Maint > Log Maintenance > Query Logs.
----End

7.1.3 Querying Component Status

Context
You can query component status in the following two ways.


Procedure


----End

7.1.4 Querying System Parameters

Procedure


----End
Issue 02 (2019-10-10)
You can view the temperatures from (temp set point – 3° C) to (temp set point + 3° C) at least and

from (temp set point – 30° C) to (temp set point + 30° C) at most.
You can view the humidity from (humidity set point – 5%) to (humidity set point + 5%) at least, and

from (humidity set point – 50%) to (humidity set point + 50%) at most. Specific humidity
fluctuation range displayed varies according to different models of devices.
Enter the Status Summary screen. The control or running status of major components
such as the compressor, EEV, indoor fan are displayed.
Enter the Device Details screen and then enter the menu of a specific component. All
parameters for the component are displayed.
When viewing the component status through Status Summary, choose Common
Function > Status Summary or Running > Status Summary on the home screen. The
general component status screen is displayed.
When querying component status through Device Details (using the T/H sensor as an
example), choose Running > Device Details > T/H Sensor on the home screen to query
the status of the T/H Sensor.
Choose Common Function > Operating Info on the home screen, the related screen is
displayed.
Choose Running > System Overview on the home screen, the related screen is
displayed.
Copyright © Huawei Technologies Co., Ltd.
7 FAQ
176