Maintenance And Cleaning; Replacement Parts - Dyna-Glo EG7500DH User's Manual And Operating Instructions

MAINTENANCE

MAINTENANCE AND CLEANING

1. Before cleaning, make sure the power has been turned off at the circuit
breaker panel and that the heating element of the heater is cool.
2. To maintain the external appearance of the heater, the unit occasionally needs
to be wiped with a dry duster. During the summer months, or at other times
when the appliance is not in use and is completely cold, it should be the wiped
over with a damp cloth.
3. Do not use abrasive clearing powders or furniture polish. Do not use chemical
or abrasive products, metallic scourers and so on, which may deteriorate the
surface, to clean the appliance.
4. During the summer months, or at other times when the appliance is not in
use, disconnect the power supply, and cover the whole appliance with a
dustcloth. Moreover, keep the appliance in a dry and cool place.
5. All other servicing should be performed by qualified service personnel. Do not
try to repair the heater yourself.

REPLACEMENT PARTS

Part Description
1 Back mesh
2 Hanging plate
3 Fan Blade
4 Air guide plate
5 Large handle seat
6 Small handle seat
7 Spring
8 Motor
Part# Part
EG5000001AC
EG5000002AC 10
EG5000003AC 11
EG5000004AC 12
EG5000005AC 13
EG5000006AC 14
EG5000007AC 15
EG5000008AC 16
13
Description
9 Heater
Selection Switch
Main Board
Terminal block
Temperature CUT-OFF
Control Panel Circuit Board EG7500DH002AC
Control Panel box
Infrared Remote Control
Part#
EG7500001AC
EG5000011AC
EG7500DH001AC
EG5000014AC
EG5000017AC
EG7500DH003AC
EG7500DH004AC