Down Control Button; Up Control Button; Timer Button; Fahrenheit/Celsius Button - Dyna-Glo EG7500DH User's Manual And Operating Instructions

OPERATING INSTRUCTIONS

4. DOWN Control Button:

This button is used to decrease temperature or timer settiing. It adjusts the
temperature range between 20°C - 35°C (68°F - 95°F) in 2°F (/1°C) increments.

5. UP Control Button:

This button is increasing temperature or timer setting. It adjusts the temperature
range between 20°C - 35°C (68°F - 95°F) in 2°F (/1°C) increments.

6. Timer Button:

This button controls the Timer ON/OFF and 8 settings from 1hour to 8 hours.
When the Timer is first turned on, it will come on at the shortest time setting
(1hour). Each time the Timer button is pressed, the time increases by 1 hour, up
to the longest setting (8 hours). Once the set time expires, all garage heaters
functions will be automatically turn off.

7. Fahrenheit/Celsius Button:

REMOTE:
This button displays F (Fahrenheit) or C (Celsius) depending on how the
temperature mode is set. When the garage heater is turned on, the Fahrenheit
(F) temperature will be displayed.
GARAGE HEATER :
To switch from Fahrenheit to Celsius, or vise-versa, when the garage heater is
ON, hold HEATER CONTROL button for 5 seconds. Unless power to the unit has
been interrupted, the garage heater will remember the last temperature mode
setting will start at that setting,
12